Any workshop can cut a shape. The work is deciding where it separates, proving that seam at full size, and engineering the point it hangs from.
Fabricated in 304 or 316L in our own factory in Foshan, then trial-assembled before packing.
A 3D model or a sculptor's drawing, turned into a real object that can be cut, welded, moved and hung without visible compromise.
| Element | What it is | Hard part | What we control |
|---|---|---|---|
| Sculptural formA shape with no flat reference | Cut from a model, formed, welded, dressed. | Splitting a smooth surface into parts without a seam showing in the wrong place. | Seam placed by us, then approved |
| Mirror-polished objectAny form finished to a mirror | Polished progressively to a mirror, welded first. | Mirror shows every departure from the form. Nothing hides. | No visible weld, no orange peel |
| Feature screenLarge decorative panel or array | Laser-cut sheet or tube, framed, sometimes structural. | It usually has to be structural enough to stand up and thin enough to look absent. | Aperture ±1 mm |
| Suspended pieceAnything hung from the slab | Fabricated form with an engineered hanging point. | Load path must be designed, not improvised on site. | Hanging detail drawn and approved |
Short in steps, long in argument. Most of the time goes into agreeing where the seams go.
Drawing team
Questions in 48 h
Detailers + engineer
A split plan and a hanging plan
Sample cell
One seam at full size, in final finish
Laser · brake · TIG
Dimensional check against model
Polishing bay
Mirror check under raking light
Trial crew
Assembled once, numbered, crated in lift order
The split plan is made with the model open, so seams land on curvature changes rather than across the visible face.
If skippedA seam is placed where the sheet happens to be 1500 mm wide, and it runs straight through the part people photograph.
One junction is made at 1:1 in the final finish before the piece is built.
If skippedA seam that looked fine in a render is a 1 mm step in mirror polish, and the whole piece is re-made.
Load path, fixing type and slab capacity are drawn and signed before fabrication.
If skippedThe piece arrives, the slab cannot take the anchor, and a 400 kg object waits on the floor for a structural answer.
Art photography is about the object, not the room. These four are one piece, from the rib cage to the trial assembly.
PDF, DWG or DXF. You get a price, and a list of every detail we think will fail on site — whether you order or not.